Mikrotik Wireless for Home/Office
Showing 25–48 of 54 results
-
netPower Switches
Mikrotik netPower Lite 7R CSS610-1Gi-7R-2S+OUT
- An outdoor reverse PoE switch with Gigabit Ethernet and 10G SFP+ ports.
- With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
- With this switch, you won’t have to worry about power issues, as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps, switching capacity of 56 Gbps, and a forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately. Read more information about GPEN concept.
SKU: CSS610-1Gi-7R-2S+OUT
SKU: CSS610-1Gi-7R-2S+OUT -
QRT
Mikrotik QRT 5 AC RB911G-5HPACD-QRT
- Dual chain 5GHz 802.11a/n/ac QCA9882, 128 MB RAM, 720 MHz CPU, 24 dBi antenna gain
- The QRT 5 ac is a rugged outdoor flat panel antenna, with a built-in RouterBOARD. The device has a 24dBi antenna and a high power 5GHz wireless transmitter which now supports 802.11ac and is also backward compatible with 802.11a/n.
- Inside is the high power RB911G-5HPacD dual chain wireless device (see separate brochure), with a high performance, high output power wireless transmitter. It has a Gigabit Ethernet port, to fully utilize the benefit of 802.11ac high-speed wireless.
- Easy to use and quick to deploy, QRT is ideal for longer point-to-point links at 802.11ac speeds.
- – QRT 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- – QRT 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RB911G-5HPacD-QRT
SKU: RB911G-5HPacD-QRT -
QSFP
Mikrotik QSFP+ cable Q+DA0001
- 40 Gbps direct attach QSFP+ cable
- Connect two CRS326-24S+2Q+RM switches without a hassle – this cable has integrated QSFP+ modules, plug it in and enjoy the speed! The cable is 1 meter long and is fairly flexible – your devices don’t have to be on top of each other.
SKU: Q+DA0001
SKU: Q+DA0001 -
MikroTik Accessories
Mikrotik RB-PoE Injector RBPOE
- PoE injector, for 10/100Mbps products
- Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps to reduce the number of wires that lead up the tower, and in other situations.
- For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accommodate any losses in cables.
SKU: RBPOE
SKU: RBPOE -
SFP
Mikrotik RJ45 SFP 10/100/1000M copper module
- RJ45 SFP 10/100/1000M copper module
- S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, popular demand is now also available for purchase separately.
SKU: S-RJ01
SKU: S-RJ01 -
Sleeve
Mikrotik Sleeve30
- Sleeve30 kit for our mANT30 parabolic antenna to enhance point-to-point link performance
- The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce the impact on adjacent RF devices by removing the side radiation from the antenna.
- Sleeve30 Kit also reduces wind load and protects antenna reflector and feed on the harsh environment, improving PtP link sustainability.
- Sleeve30 shell is made of corrosion resistive, lightweight aluminum; the front cover has excellent RF signal transparency.Includes aluminum shell, front cover, fasteners, silicone sealant
Note: Basebox wireless device pictured for illustrative purposes. It is not included
SKU: Sleeve30
SKU: Sleeve30 -
Mikrotik Switches
MikroTik Switch RB260GSP
- 5x Gigabit PoE out Ethernet Smart Switch, SFP cage, plastic case, SwOS
- The RB260GSP is a small SOHO switch, which features power output on its ethernet ports. Ports 2-5 can power other PoE-capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products – SwOS.
SKU: R RB260GSP
SKU: RB260GSP -
Mikrotik Switches
MikroTik Switche RB260GS
- 5x Gigabit Ethernet Smart Switch, SFP cage, plastic case, SwOS
- The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip.
- Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D, and S-35/53LC20D (not included)
- It is powered by an operating system designed specifically for MikroTik Switch products – SwOS.
- SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: Allows you to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
SKU: RB260GS
SKU: RB260GS -
SXT
Mikrotik SXTsq 5 AC RBSXTSQG-5ACD
- Low-cost small-size 16dBi 5GHz dual chain integrated CPE/Backbone with AC support and Gigabit Ethernet
- The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize the speeds that the 802.11ac protocol provides.
- The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner.- SXTsq 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBSXTSQG-5ACD
SKU: RBSXTSQG-5ACD -
SXT
MikroTik SXTsq Lite5 CPE RBSXTSQ5nD
- Low-cost small-size 16dBi 5GHz dual chain integrated CPE/Backbone
- The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof, and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner (see photos for comparison).
- The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows adjusting at every angle (see photo and related product).- SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq Lite5 (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBSXTSQG-5ACD
SKU: RBSXTSQ5nD -
wAP
Mikrotik wAP ac RBwAPG-5HacT2HnD
- Small dual-band 2.4 / 5GHz white weatherproof wireless access point for mounting on a ceiling, wall, or pole
- The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need wireless access from your phone or computer.
- The device has one Gigabit Ethernet port, it supports 802.11a/b/g/n/ac wireless protocols and can work at both the 2.4GHz and 5GHz frequencies simultaneously. It looks unobtrusive and sleek.
- The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – so that it is securely attached to its mounting location.
- We have two versions available.- RBwAPG-5HacT2HnD (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).- RBwAPG-5HacT2HnD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz, and 5725-5835MHz frequencies. This lock can not be removed.
SKU: RBwAPG-5HacT2HnD
SKU: RBwAPG-5HacT2HnD -
Mikrotik Access Points, wAP
MikroTik wAP BE RBwAP2nD-BE
- The wAP is a small weatherproof wireless access point for your mobile devices – perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need wireless access from your phone or computer.
- The device has one 10/100 Ethernet port, it supports 802.11b/g/n wireless standards. It looks unobtrusive and sleek, available in two colors – black (RBwAP2nD-BE) and white (RBwAP2nD).
- It is also possible to run the Ethernet cable directly behind the unit, to inside the wall, there is a special opening on the back of the case. This way, the unit doesn’t attract attention and blends into any environment.
SKU: RBwAP2nD-BE
SKU: RBwAP2nD-BE -
RouterBOARD
Mikrotik RouterBoard 10xGigabit RB3011UIAS-RM
- 1U rackmount
- 10xGigabit Ethernet
- SFP
- USB 3.0
- LCD
- PoE out on port 10
- 2×1.4GHz CPU
- 1GB RAM
- RouterOS L5
The Mikrotik RB3011UIAS-RM RouterBoard 10xGigabit with Dual-core 1.4GHz ARM CPU, 1GB RAM, 10x Gbit LAN, 1xSFP port, RouterOS L5, 1U rackmount case, LCD pane.
The Mikrotik RB3011UiAS-RM is a new multi-port device, our first to be running an ARM architecture CPU for higher performance than ever before.
The RB3011UiAS-RM has ten Gigabit ports divided into two switch groups, an SFP cage and for the first time a SuperSpeed full-size USB 3.0 port, for adding storage or an external 3G/4G modem.
It comes with a 1U rackmount enclosure, a touchscreen LCD panel, a serial console port, and PoE output functionality on the last Ethernet port.
SKU: RB3011UIAS-RM
SKU: RB3011UIAS-RM -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS317-1G-16S+RM
The new Mikrotik Cloudrouter Switch CRS317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high-performance 10GbE connectivity and a 1GbE copper port for management.
It is powered by a next-generation switching chip, giving you wire speed performance for all sixteen 10GbE ports with any Ethernet frame size. New features such as hardware-based Spanning Tree Protocol and Link Aggregation (LACP) provide enhanced protection and true professional performance for your demanding network.
The unit has dual redundant power supplies and a passive cooling case – for hot environments two redundant fans will automatically keep the system cool if needed.
SKU: CRS317-1G-16S+RM
SKU: CRS317-1G-16S+RM -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS326-24G-2S+RM
- 24 Gigabit port switch with 2 x SFP+ cages in 1U rackmount case, Dual boot (RouterOS or SwitchOS)
SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! - It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings.
- It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
SKU: CRS326-24G-2S+RM
SKU: CRS326-24G-2S+RM - 24 Gigabit port switch with 2 x SFP+ cages in 1U rackmount case, Dual boot (RouterOS or SwitchOS)
-
Cloud Router Switches
Mikrotik Cloud Router Switch CRS328-24P-4S+RM
- 24 port Gigabit Ethernet router/switch with four 10Gbps SFP+ ports in 1U rackmount case, Dual Boot and PoE output, 500W
- The Mikrotik Cloudrouter Switch CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).
- IT comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving a guaranteed 450 W (3×150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.
- The device has a “Dual boot” feature that allows you to choose between two operating systems – RouterOS or SwOS.
SKU: CRS328-24P-4S+RM
SKU: CRS328-24P-4S+RM -
RouterBOARD
Mikrotik Router Board RB912UAG-5HPnD
- The RB912UAG-5HPnD is a very versatile device. It is a small wireless router with an integrated high power wireless card and an additional miniPCIe slot for 802.11 wireless or 3G card. The Gigabit port helps to utilize the full potential of 802.11n wireless speeds.
- It has built-in 16kV ESD protection on both the Ethernet and the MMCX ports
- RB912UAG-5HPnD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- RB912UAG-5HPnD (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RB912UAG-5HPnD
SKU: RB912UAG-5HPnD -
RouterBOARD
Mikrotik RouterBoard CCR1009-8G-1S-1S+
- Mikrotik RouterBoard CCR1009-8G-1S-1S+ is a low-cost industrial grade router with Tilera 9 core CPU! Amazing power and performance for value – this is our full-featured, low-end CCR device, the Cloud Core Router (CCR1009). If you need many packets per second on a budget – Cloud Core Router with 9 cores is your best choice.
- The device comes in a 1U rackmount case, has one SFP port, one SFP+ port, eight Gigabit ethernet ports, a serial console port, a USB port, and dual power supplies.
- The CCR1009-8G-1S-1S+ has 2GB of DDR3 800MHz RAM soldered directly to the motherboard and cannot be expanded.
SKU: CCR1009-8G-1S-1S+
SKU: CCR1009-8G-1S-1S+ -
RouterBOARD
MikroTik RouterBOARD Ethernet Router RB951G-2HnD
- 2.4Ghz AP, 5xGigabit Ethernet, USB, 600MHz CPU, 128MB RAM
- The MikroTik RB951G-2HnD Gigabit Ethernet Router is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port, and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built-in.
- In comparison with the previous model RB751G-2HnD, it has a more powerful 600Mhz CPU (instead of 400Mhz), more RAM – 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided.
SKU: RB951G-2HnD
SKU: RB951G-2HnD -
hAP, Mikrotik Access Points
MikroTik RouterBOARD hAP Access Point RB951Ui-2nD
- 2.4GHz AP
- Five Ethernet ports
- PoE-out on port 5
- USB for 3G/4G support
- This Mikrotik RB951UI-2nD hAP access point is the perfect device for homes or small offices where all you need is a wireless AP and a few wired devices connected. Based on our popular RB951-2n, the new hAP is an improvement in many areas.
- The device can be powered from the power jack or with passive PoE from a PoE injector. The power adapter is included.
- hAP provides a PoE output function for port #5 – it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA.
- The hAP is preconfigured, so all you need to do is plug in the internet cable, the power, and start using the internet by connecting to the MikroTik network.
SKU: RB951UI-2nD
SKU: RB951UI-2nD -
Mikrotik Access Points, MikroTik Wireless Systems for Home/Office
MikroTik RouterBOARD RB951Ui-2HnD Wireless SOHO Access Point
-9%
Mikrotik Access Points, MikroTik Wireless Systems for Home/OfficeMikroTik RouterBOARD RB951Ui-2HnD Wireless SOHO Access Point
- 2.4GHz AP with five Ethernet ports and PoE output on port 5. It has a 600MHz CPU, 128MB RAM and a USB port.
- The Mikrotik RB951UI-2HND Wireless Router is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port, and a high-power 2.4GHz 802.11b/g/n wireless AP with antennas built in.
- It has a 600MHz CPU,128MB of RAM, and PoE output function for port #5 – it can power other PoE-capable devices with the same voltage as applied to the unit. The maximum load on the port is 500mA.
SKU: RB951UI-2HND
SKU: RB951UI-2HND
