mANT
Mikrotik mANT30 MTAD-5G-30D3
Availability:
8 in stock
- Parabolic dish antenna for 5GHz, 30dBi gain
- mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accommodate our Basebox series products, but can be used for any pole-mounted wireless device due to the adequate length of the included FlexGuide cable.
- Two modifications are available – with a standard type mount (MTAD-5G-30D3), and with a precision alignment mount (MTAD-5G-30D3-PA). The antennas come packaged with all necessary accessories and cables.Note Basebox wireless device pictured for illustrative purposes. It is not included
SKU: MTAD-5G-30D3
Compare
-
mANT
Mikrotik mANT30 MTAD-5G-30D3
- Parabolic dish antenna for 5GHz, 30dBi gain
- mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accommodate our Basebox series products, but can be used for any pole-mounted wireless device due to the adequate length of the included FlexGuide cable.
- Two modifications are available – with a standard type mount (MTAD-5G-30D3), and with a precision alignment mount (MTAD-5G-30D3-PA). The antennas come packaged with all necessary accessories and cables.Note Basebox wireless device pictured for illustrative purposes. It is not included
SKU: MTAD-5G-30D3
SKU: MTAD-5G-30D3 -
Basebox, Mikrotik Access Points, MikroTik Antennas
Mikrotik Basebox 2 RB912UAG-2HPnD-OUT
- The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual-band device or a 3G/4G modem.
- The case can be opened with one hand and is protected against the elements. USB, Ethernet, and Grounding wire exits are provided on the bottom, behind a protective door.
- Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. The package also includes a PoE injector and power supply unit.
SKU: RB912UAG-2HPnD-OUT
SKU: RB912UAG-2HPnD-OUT -
Basebox, Mikrotik Access Points, MikroTik Antennas
Mikrotik Basebox 5 RB912UAG-5HPND-OUT
- TheThe RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual-band device.
- The case can be opened with one hand and is protected against the elements. USB, Ethernet, and Grounding wire exits are provided on the bottom, behind a protective door.
- Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. The package also includes a PoE injector and power supply unit.
- Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount- RB912UAG-5HPnD-OUT-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- RB912UAG-5HPnD-OUT (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RB912UAG-5HPND-OUT
SKU: RB912UAG-5HPND-OUT
$1.56 for 3 item(s)
Product specifications
| Details | |
|---|---|
| Product code | MTAD-5G-30D3 |
| Beamwidth | +/-2.5 deg |
| Certification | CE, ROHS |
| Connector | 2x RP-SMA Female (outside thread) |
| Cross Polarization | >40 dB |
| Diameter x Depth | 70 x 45cm (27.5 x 17.8in) |
| Elevation adjustment range | +/- 20 deg |
| Frequency Range | 4.7-5.875 GHz |
| Front-to-Back Ratio | >30 dB |
| Impedance | 50 ohms |
| Outdoor Rating | ETSI EN 300 019-2-4 |
| Packaged size | 73x73x20cm (29x29x8in) |
| Packaged weight | 7.5 kg (16.5 lbs) |
| Polarization | Vertical and Horizontal |
| Pole Mount Diameter Range | 3 to 7cm (1.2 to 2.75in) |
| Port to Port Isolation | >40dB min |
| Power Rating | 100W |
| Reflector | Aluminum |
| Standards | EN 302 326 DN1, DN2, DN3, DN5 |
| Tested ambient temperature | -50°C to 80°C(-49°F to 158°F) |
| VSWR | ≤ 1.4 typ, ≤ 1.8 max |
| Weight | 4.8kg (10.7 lbs) |
| Wind Load (125 mph) | 181.4kg (400 lbs) at 125 mph, 50 kg at 40 m/s, 28 kg at 30 m/s |
| Wind Survivability | 201kph (125mph) |
| Suggested price | |
| Brands | MikroTik Wireless |
|---|
Based on 0 reviews
Be the first to review “Mikrotik mANT30 MTAD-5G-30D3”
Related products
-
cAP, Mikrotik Access Points
Mikrotik cAP AC RBcAPGi-5acD2nD
- Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support, and IPsec hardware encryption support
- The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual-band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards and will provide coverage in 360 degrees around it.
- Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. The device supports IPsec hardware acceleration too.- cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).- cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz, and 5725-5835MHz frequencies. This lock can not be removed.
SKU: RBcAPGi-5acD2nD
SKU: RBcAPGi-5acD2nD -
cAP, Mikrotik Access Points
Mikrotik cAP Ceiling Access Point RBCAP2ND
- Ceiling AP, Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support
- RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality businesses like hotels, airports, shopping malls, etc.
- cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
- Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter, and even the screws and screw anchors.
SKU: RBCAP2ND
SKU: RBCAP2ND -
LoRa, wAP
MikroTik Antenna kit for LoRa®TOF-0809-7V-S1
- 6.5 dBi Omni antenna for 824-960 MHz
- Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz, 1 m long SMA cable, and mechanical holder for quick and easy mast attachment – when you need that extra network coverage.
SKU: TOF-0809-7V-S1
SKU: TOF-0809-7V-S1 -
LHG
Mikrotik LHG 5 RBLHG-5nD
- Dual chain 24.5dBi 5GHz CPE/Point-to-Point Integrated Antenna, 600Mhz CPU, 64MB RAM
- The LHG 5 is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.
- The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
- We have two versions available.
- LHG 5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- LHG 5 (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBLHG-5nD
SKU: RBLHG-5nD
There are no reviews yet.