Shop
Showing 529–552 of 569 results
-
Fiber Optic Pigtail
ATB With SC/ APC and SC/ APC Simplex Pigtail
- SC-APC Singlemode Fiber Optic Pigtail Simplex 1M – Teleweaver
- SC-APC Singlemode Fiber Optic Pigtail is a connecting SC-APC connector with a single-mode fiber cable in the end.
- Normally Single-mode Fiber Optic Pigtail is simplex, but also has multi-core fiber, they are all available for Active device termination installations
- SC-APC single-mode fiber optic pigtails have different colors and meter numbers, 0.9/2.0/3.0mm wire diameter.
- We design, manufacture, and test our fiber optic pigtail according to protocol and performance under industry standards.
SKU: FO-SC-APC-SMP
SKU: FO-SC-APC-SMP -
Fiber Optic Pigtail
ATB With SC/ APC Simplex Adapter
- Name: Simplex Fiber pigtails
- Fiber end-face: PC, UPC, APC
- Fiber brand: YOFC, Corning
- Fiber mode: G652D, G657A1, G657A2
- Cable diameter: 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm
- Cable core: simplex, duplex, 6core,12core, 24core, 48core
SKU: FO-SC-APC-SA
SKU: FO-SC-APC-SA -
Cable Clamps
Buckles C201
- Reinforce Buckles T can be made of stainless steel of different grades: 201, 202, 304, 316. Grade 316 has a superior rust corrosion resistance to be used in marine, in very aggressive and hot environments. Stainless steel buckle other called stainless steel clip has an ultimate locking system reinforced by two additional lines, which prevent the buckle from flexion, after installation. Keywords: Cable buckles, made of stainless steel in different grades 201, 202, 304and 306
SKU: HC-20-T
SKU: HC-20-T -
Splice Closure
Enclosures 48, Rectangle
-
- Provides a perfect solution for protecting fibre splices from the permeation of water.
- Used for underground, aerial, building entrance, pedestal and direct buried applications.
- Closure can accommodate up to 96 cores, which can cover most of the applications in fiber distribution networks.
- FOSC106 has Mechanical and Chemical resistance for all the application areas in fibre networks and is designed
- Developed based on proven sealing technology.
- Made of robust ABS parts and special silicon sealing materials.
- The sealing of the closure is achieved by non oxidized special screws.
- The closure kit includes all the necessary accessories–parts for complete closure installation including.
SKU: SPFC-NH-XM-XX
SKU: SPFC-NH-XM-XX -
-
Connectors, Fibre Optical Networks
Fast Connector SC/ APC
- Factory price, can be reused
- Accurate mechanical dimension: 55mm*8.9mm*7mm
- Suitable for 3mm drop cable and 3x2mm flat cable
- Using simple tools without electrical power, no special tools are needed to install
- Easy and fast installation, 30 seconds to learn install, 90 seconds to operate in the field
- No need for polishing or adhesives, ceramic ferrule with embedded fiber stub is pre-polished
- Fiber aligned in v-groove through the ceramic ferrule
- Low-volatile reliable matching liquid preserved by side cover
- Unique bell-shaped boot maintains the minimum fiber bend radius
SKU: FCSCAPC2021
SKU: FCSCAPC2021 -
Fibre Access Terminals (FAT)
FAT Box With 16 Core Splitter 1*16 LC/ UPC Optical Splitter Black
- Low Insertion loss
- Low PDL\
- High Return Loss
- Uniform Power Splitting
- Compact Design
- Wide Operating Wavelength
- \Wide Operating Temperature
- Excellent Environmental & Mechanical Stability
- Qualified Under Telcordia GR-1221 and GR-1209
SKU: Â SPL-16-UPC-SCSC-ABS
SKU: SPL-16-UPC-SCSC-ABS -
Fibre Access Terminals (FAT)
FAT Box With Bare 1×16 Splitter 16 Core Distribution Box
- Industry Standard User Interface, be made of ABS plastic.
- Can accommodate 1×4,1×8,1X16, 2×4,2×8 & 2×16 PLC steel tube splitter.
- Rainfall resistant, outdoor using.
- Can load 24pcs LC, FC, ST, SC … adapters.
- Wall mounting and pole mounting application.
- 2pcs cable entry ports; cable can be entry without cutting.
SKU: FLK-FAT-216N
SKU: SPDF-O16SCS-PMPB/PMHPB -
PLC Splitter
FAT Box With Bare PLC Splitter 1×4 0.5M Length
- Uniform power splitting
- Compact package dimension
- Low polarization dependent loss
- Good channel-to-channel uniformity
- Low Insertion Loss and high Return Loss
- Environmentally and mechanically stable
- Wide operating wavelength range from 1260nm to 1650nm
SKU: PLC-Splitter-1×4
SKU: PLC-Splitter-1x4 -
PLC Splitter
FAT Box With Bare PLC Splitter 1×8 0.5M Length
- Uniform power splitting
- Compact package dimension
- Low polarization dependent loss
- Good channel-to-channel uniformity
- Low Insertion Loss and high Return Loss
- Environmentally and mechanically stable
- Wide operating wavelength range from 1260nm to 1650nm
SKU: PLC-Splitter-1×8
SKU: SKU: PLC-Splitter-1x8 -
ADSS Cable
Fibre Cable 12 Core ADSS 4KM/ Roll
ADSS (All Dielectric Self-supporting Optical Fiber Cable)
- Fiber count: 2-144(G652D);
- Loose tube: PBT;
- Central strength member: FRP;
- Waterproof layer: cable gel;
- Outer inner sheath: PE
- Operating temperature: -40°C~+70°C
- Application: Apply to Long distance communication systems, Local area network systems and Subscriber network systems
SKU: ADSS-122-NM-100S-4KM -
-
ADSS Cable
Fibre Cable 48 Core ADSS 4KM/ Roll
- Fiber count: 2-144(G652D);
- Loose tube: PBT;
- Central strength member: FRP;
- Waterproof layer: cable gel;
- Outer inner sheath: PE
- Operating temperature: -40°C~+70°C
- Application : Apply to Long distance communication system, Local area network system and Subscriber network system
SKU: ADSS-48-NM-150S-2KM
SKU: ADSS-48-NM-150S-2KM -
Splicing
Fibre Fusion Splicing Machine AI-9 Signal Fire
- Used for FTTH and ordinary fiber project
- Â Core to core alignment by PAS technology
- 8 sec splicing time and 30 sec heat time
- 300 X or Y view, 200 X and Y view
- 5 inch digital high-quality LCD screen, observe X and Y view at same time
- Three in one fixture, splicing single fiber, cable indoor and pig tail
- Built-in large capacity lithium battery of 200 times splicing and heating
- Small size and lightweight, 2.1KG including battery
SKU: FFSM-Al-9
SKU: FFSM-Al-9 -
-
Patch Cords & ODF'S
Fibre Patch Cords 2MM 2M SC/APC-SC/ UPC
- Superior qualified standard PC, APC, UPC, SPC polishing;
- 100% optic test: Insertion Loss: ≤0.3 (PC); ≤0.2 (APC); ≤0.2 (UPC); ≤0.3 (SPC);
- 100% optic test: Return Loss: ≥45 (PC); ≥60 (APC); ≥55 (UPC); ≥50 (SPC);
- φ0.9mm, φ2.0mm, φ3.0mm fiber optic cable optional;
- Single mode (9125) or multi mode (50125 or 62.5125) fiber available;
- FC, SC, LC, MU, ST, MT-RJ, etc connector
- Good exchange ability and good durability;
- Available in fiber bunch, ribbon fan-out, pigtail available;
- Meets ISO9001, and Bell core GR 326-core standards;
- Customized specifications welcomed.
SKU: Sm Sx Fiber Patch Cord
SKU: Sm Sx Fiber Patch Cord -
Patch Cords & ODF'S
Fibre Patch Cords LC/UPC-SC/UPC 2mm, 2m
- Singlex Mono-Mode (SM) fiber optic cable.
- Low insertion loss and back reflection loss
- Good Durability
- Good exchangeability
- High temperature stability
- Standard: Telcordia GR-326-CORE
- compact design
- IEC,JIS,TELCORDIA-326 compliance
- It has an LC/UPC connector on one end and an SC/APC connector on the other end.
- Cable verified 100%, of first quality and LSZH (Low Smoke Halogen Free).
- Section of the central core and its coating of 9/125 microns (?m).
- Total section of 3.0 mm cable (including kevlar fiber and yellow sheath)
- Connector:LC/UPC-LC/UPC
- Fiber Type:SM
SKU: SC/LC- OFPC
SKU: SC/LC- OFPC -
-
Cloud Core Router
MikroTik Cloud Core Router CCR1009-7G-1C-1S+PC
- MikroTik CCR1009-7G No-Switch Chip: The device now features only fully independent Ethernet ports, each with a direct connection to the CPU, allowing it to overcome previously shared 1Gbit limitations from switch-chip ports and utilize the full potential of CPU processing power on those ports.
- Combo-Port: A single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. The Port also allows switching from one interface to another from software or the new hardware fail-over feature.
- 100Mbps SFP Support: This is the first MikroTik device that supports 100BASE-LX / 100BASE-SX / 100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
- More Throughput: Due to how the ports are connected to the CPU, the new CCR1009 models can achieve higher theoretical throughput.
SKU: CCR1009-7G-1C-1S+PC
SKU: CCR1009-7G-1C-1S+PC-1 -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS106-1C-5S
The Mikrotik Cloud Router Switch CRS106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.
SKU: CRS106-1C-5S
SKU: CRS106-1C-5S
