Shop
Showing 529–551 of 551 results
-
Patch Cords & ODF'S
Fibre Patch Cords 2MM 2M SC/APC-SC/ UPC
- Superior qualified standard PC, APC, UPC, SPC polishing;
- 100% optic test: Insertion Loss: ≤0.3 (PC); ≤0.2 (APC); ≤0.2 (UPC); ≤0.3 (SPC);
- 100% optic test: Return Loss: ≥45 (PC); ≥60 (APC); ≥55 (UPC); ≥50 (SPC);
- φ0.9mm, φ2.0mm, φ3.0mm fiber optic cable optional;
- Single mode (9125) or multi mode (50125 or 62.5125) fiber available;
- FC, SC, LC, MU, ST, MT-RJ, etc connector
- Good exchange ability and good durability;
- Available in fiber bunch, ribbon fan-out, pigtail available;
- Meets ISO9001, and Bell core GR 326-core standards;
- Customized specifications welcomed.
SKU: Sm Sx Fiber Patch Cord
SKU: Sm Sx Fiber Patch Cord -
Patch Cords & ODF'S
Fibre Patch Cords LC/UPC-SC/UPC 2mm, 2m
- Singlex Mono-Mode (SM) fiber optic cable.
- Low insertion loss and back reflection loss
- Good Durability
- Good exchangeability
- High temperature stability
- Standard: Telcordia GR-326-CORE
- compact design
- IEC,JIS,TELCORDIA-326 compliance
- It has an LC/UPC connector on one end and an SC/APC connector on the other end.
- Cable verified 100%, of first quality and LSZH (Low Smoke Halogen Free).
- Section of the central core and its coating of 9/125 microns (?m).
- Total section of 3.0 mm cable (including kevlar fiber and yellow sheath)
- Connector:LC/UPC-LC/UPC
- Fiber Type:SM
SKU: SC/LC- OFPC
SKU: SC/LC- OFPC -
-
Cloud Core Router
MikroTik Cloud Core Router CCR1009-7G-1C-1S+PC
- MikroTik CCR1009-7G No-Switch Chip: The device now features only fully independent Ethernet ports, each with a direct connection to the CPU, allowing it to overcome previously shared 1Gbit limitations from switch-chip ports and utilize the full potential of CPU processing power on those ports.
- Combo-Port: A single 1Gbit software interface that has two hardware interfaces – an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. The Port also allows switching from one interface to another from software or the new hardware fail-over feature.
- 100Mbps SFP Support: This is the first MikroTik device that supports 100BASE-LX / 100BASE-SX / 100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
- More Throughput: Due to how the ports are connected to the CPU, the new CCR1009 models can achieve higher theoretical throughput.
SKU: CCR1009-7G-1C-1S+PC
SKU: CCR1009-7G-1C-1S+PC-1 -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS106-1C-5S
The Mikrotik Cloud Router Switch CRS106-1C-5S is a desktop size smart switch, equipped with one Gigabit Ethernet / SFP combo port and five 1.25Gbps SFP cages. The package includes a power supply. Powered by a 400MHz CPU and 128MB RAM, it runs RouterOS with a L5 license and supports 11- 30V power.
SKU: CRS106-1C-5S
SKU: CRS106-1C-5S -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS109-8G-1S-2HnD-IN
- 8x Gigabit Smart Switch, 1x SFP cage, LCD, 802.11b/g/n Dual Chain wireless, 600MHz CPU, 128MB RAM, Metal desktop case, RouterOS L5, supports 10-57V, 802.3af/at compliant
- The Mikrotik Cloud Router Switch CRS 109-8G-1S-2HnD-IN is a new “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and a high-power 2.4GHz wireless. The product supports 10-57V and is 802.3af/at compliant!
- Our CRS series combines the best features of a fully functional router and a Layer 3 switch, which is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
SKU: CRS109-8G-1S-2HnD-IN
SKU: CRS109-8G-1S-2HnD-IN -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS112-8G-4S-IN
- 8x Gigabit Ethernet Smart Switch, 4x SFP cages, 400MHz CPU, 128MB RAM, desktop case, RouterOS L5
- The Mikrotik Cloud Router Switch CRS112-8G-4S-IN is a “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and four SFP cages.
- Our CRS series combines the best features of a fully functional router and a Layer 3 switch, which is powered by the familiar RouterOS.
- All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
SKU: CRS112-8G-4S-IN
SKU: CRS112-8G-4S-IN -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS125-24G-1S-2HnD-IN
- 24x Gigabit Ethernet layer 3 Smart Switch, 1x SFP cage, LCD, 802.11b/g/n Dual Chain wireless, 600MHz CPU, 128MB RAM, Metal desktop case, RouterOS L5
- The Mikrotik Cloud Router Switch CRS125-24G-1S-2HnD-IN is our new Smart Switch series. It combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes.
- What’s more – this device has a built-in 2.4GHz wireless access point, which means you can have an AP, a router with any number of ports, and a full wire speed smart switch, all in one device – ideal for medium/small businesses and offices. It has 24 Gigabit ports, one SFP cage, a micro-USB port, and a built-in Wireless AP.
Perfect SOHO gateway router, switch, 11n AP all in one box
- Ethernet, Fiber, or 4G (with optional USB modem) gateway connection to the internet
- RouterOS gateway/firewall/VPN router with passive cooling
- Up to twenty-five-gigabit switch ports (1xSFP and 24xRJ45)
- High power 2.4GHz 11n wireless AP
SKU: CRS125-24G-1S-2HnD-IN
SKU: CRS125-24G-1S-2HnD-IN -
Media Converters
Nufiber 10/100/1000Mbps Media Converters
- 8 RJ45 ports and 2 SC fiber port or 2 SFP sockets,It can convert Optical-Electric Ethernet signals between 10/100/1000M UTP ports and 1000M optical fiber ports and switch Ethernet signals between port and port.
- Auto-negotiation function supports UTP ports to auto 10/100/1000M and Full Duplex/Half Duplex.
- Supports the max 1536 bytes frame
- Small power consumption (3W), low heat, good stability
SKU: NF-A2008F
SKU: NF-A2008F -
Media Converters
Nufiber 10/100Mbps Media Converters
- Auto-negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex
- UTP port supports MDI / MDI-X auto crossover.
- Supporting flow control
- Supporting 1552 bytes packet
- Extend fiber distance up to 2km for multi-mode fiber and 20-120km for single-mode fiber
- Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
SKU: F-C570S20A/B
SKU: F-C570S20A/B -
Splicing
Optical Fibre Cleaver
- The FC-7 is ideal for use in fusion splicing, field termination, or any other precision application. It has a simple cleaving operation that can be performed in the palm of the hand, which allows the user to take the cleaver to fiber in limited slack applications.
- Single-hand, single-action operation. To cut an optical fiber, just hold the cleaver lightly with one hand. Suitable for mechanical splice, field-assembly connectors,and fusion splicing.
SKU: FC-7
SKU: FC-7 -
-
PLC Splitters
PLC Splitter 1×16 Bare
- Free PLC Splitters 1×16 SM Splitter Sample for evaluation
- Quick Delivery on Trial Order or Bulk Order
- Well Made Premium Fiber Cable
- Plastic Packing Protection from Shipment
- 100% Money Refund or Replacement with Quality Problem
- SC FC LC ST Connectors for options
SKU: PLC116SMB
SKU: PLC116SMB -
PLC Splitters
PLC Splitter 1×2 Bare
- Free 1X2 PLC Splitter Sample for evaluation
- Quick Delivery on Trial Order or Bulk Order
- Well Made Premium Fiber Cable
- Plastic Packing Protection from Shipment
- High-quality PLC design features a protective metal casing around the fibers
- PLC splitting mechanism
- 900µm loose tube fiber for easy stripping, splicing or terminating
SKU: PLC12SMB
SKU: PLC12SMB -
PLC Splitters
PLC Splitter 1×4 Bare
- Free This PLC Splitter 1×4 SM Sample for evaluation
- Quick Delivery on Trial Order or Bulk Order
- Well Made Premium Fiber Cable
- Plastic Packing Protection from Shipment
- Compact design, suitable for installation in optical equipment
- 900μm ITU G.657A1 for fiber input/output
SKU: PLC14SMB
SKU: PLC14SMB -
PLC Splitters
PLC Splitter 1×8 Bare
- Free 1×8 Fiber PLC Splitter SM Sample for evaluation
- Quick Delivery on Trial Order or Bulk Order
- Well Made Premium Fiber Cable
- Plastic Packing Protection from Shipment
- 900µm loose tube fiber for easy stripping, splicing, or terminating
- PLC splitting mechanism divides input signal into equal parts across all output fibers
SKU: PLC18SMB
SKU: PLC18SMB -
ONU Routers
Router EPON HK739
- Hisilicon CPU SD5116 + Hisilicon WiFi chip Hi5620 can Guarantee ONT with Great Lan and WiFi performance
- Support EPON/GPON mode and switch-mode easily
- Support Route mode for PPPoE/IPoE/Static IP and Bridge mode
- Support IPv4 and IPv6 Dual mode
- Support 2.4G WIFI and 2*2 MIMO
- Support SIP Proctol for VoIP Service
- Support LAN IP and DHCP Server configuration
- Support Port Mapping and Loop-Detect
- Support Firewall function and ACL function
- Support IGMP Snooping/Proxy multicast feature
- Support TR069 remote configuration and maintenance
- Specialized design for system breakdown prevention to maintain a stable system
SKU: R-EPON-HK739-2021
SKU: R-EPON-HK739-2021 -
Patch Cords & ODF'S
SC/APC Fiber Optic pigtail 2mm, 2m
- Connector type: FC, SC, LC, ST, MTRJ, MU, E2000, MPO, DIN, D4, SMA
- Ferrule End-face: PC, UPC, APC
- Core Type: Single-mode (SM: 9/125um), Multimode (MM: 50/125um or 62.5/125um)
- Cable Quantity: simplex or duplex
- Cable Diameter: Ф3.0mm, Ф2.0mm, Ф0.9mm
- Cable Length: 1, 2, 3 mete
SKU: FPC-SCA-0S1-20-02
SKU: FPC-SCA-0S1-20-02 -
-
Splicing
Splicer Electrode
- Fiber Splicer Electrodes
- Use life for splice 3000-5000 times
- Made in China
- 1 pair of Fiber Fusion Splicer Electrode Rod for 6496A 6471 6471A 6471AG
- Note:Do not touch the tip of the electrode during the replacement process to prevent damage, and avoid the electrode falling inside the machine. The electrode position must be calibrated after the electrode is replaced
SKU: FO-SE013532
SKU: FO-SE013532 -
ADSS Cable Accessories
Stainless Steel Strap Metal Cable Ties 20mm
- Made of stainless steel, Cr18-Ni19
- With good corrosion resistance and oxidation resistance
- Self-lock design for easy operation
- Length as clients options
- Band width:1/4″ ,3/8″,1/2″,5/8″,3/4″ (6.4-19MM)
- Band thickness:0.015“,0.020”,0.025“,0.028”,0.030“ (0.4-0.75MM)
- Bundle diameter:22-285mm
SKU: YH-107
SKU: YH-107
