Shop
Showing 49–72 of 298 results
-
PTP Backhaul
Cambium PTP 550 Connectorized
- Point-to-Point Gigabit+ Capacity
- PTP 550 is a Point to Point Gigabit throughput solution based on 802.11ac Wave 2 operating in 5 GHz wireless space, addressing the gigabit capacity needs for high-speed backhaul solutions in short-range and middle-range applications provides up to 1.36 Gbps throughput with ARQ and asymmetric non-contiguous channel aggregation across 5 GHz band.
- The PTP 550 solution draws its attributes from Cambium Networks’ Point to Point products such as PTP 650/670 and PTP 450i. Each PTP 550 radio is enclosed in a rugged IP66/67 rated metal enclosure, which protects the radio from extreme conditions and solar radiation.
SKU: C050055H001A
SKU: C050055H001A -
PTP Backhaul
Cambium PTP 550 Integrated
- Point-to-Point Gigabit+ Capacity
- PTP 550 is a Point to Point Gigabit throughput solution based on 802.11ac Wave 2 operating in 5 GHz wireless space, addressing the gigabit capacity needs for high-speed backhaul solutions in short-range and middle-range applications provides up to 1.36 Gbps throughput with ARQ and asymmetric non-contiguous channel aggregation across 5 GHz band.
- The PTP 550, with its unmatched 1.36 Gbps performance, provides the highest throughput in a point-to-point configuration. The PTP 550 radio is ideal for quickly establishing high-capacity backhaul for any application ranging from video surveillance to ISP backhaul network traffic.
SKU: C050055H007A
SKU: C050055H007A -
PTP Backhaul
Cambium PTP 820E
- All outdoor, 71-86 GHz, up to 2.5 Gbps
- Millimeter-Wave Radio
- Low Visual w/ flat panel antenna (43dBi –class 2)
- Multiband with PTP 820C and PTP 820S
- High power -18dBm output power
- BPSK-1024QAM ACM (channel BW dependent)
- Channel BW: 62.5, 125, 250, 500MHz
SKU: C800082B006A
SKU: C800082B006A -
-
Cloud Core Router
Mikrotik Cloudcore Router CCR1036-12G-4S-EM
- 1U rackmount case
- 12x Gigabit ports
- 4x SFP ports
- Color touchscreen LCD
- Ports directly connected to CPU
- 16GB (2x8GB) of RAM
- 36 core CPU
- 1.2GHz clock per core
- 12 Mbytes total on-chip cache
- State of the art TILE GX architecture
- 8 mpps standard forwarding
- 24 mpps fastpath forwarding (wire speed for all ports)
- Up to16Gbit/s throughput
CCR1036-12G-4S is an industrial grade router with a cutting-edge 36 core CPU. If you need many millions of packets per second – Cloud Core Router with 36 cores is your best choice.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, a serial console cable and a USB port.
The new r2 version has onboard 8GB of RAM, onboard M.2 slot, full size USB slot and dual PSU for redundancy!
SKU: CCR1036-12G-4S-EM
SKU: CCR1036-12G-4S-EM -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS326-24S+2Q+RM
If you are working with a substantial amount of data – like providing Internet access or maintaining a huge data center the Mikrotik Cloud Router Switch CRS326-24S+2Q+RM is the perfect upgrade for your setup. CRS326-24S+2Q+RM is our first product with 40 Gbps QSFP+ ports for remarkably fast and stable fiber connection.
Overall it has two 40 Gbps QSFP+ ports and twenty-four 10 Gbps SFP+ ports, which provide total non-blocking throughput of 320 Gbps and a switching capacity of 640 Gbps with a forwarding rate of 252 Mpps with most common packets.
CRS326-24S+2Q+RM is easy to manage – it has a full-size USB port for configuration and dual power supply for redundancy – no unexpected downtime, your clients and colleagues will be thankful!
You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.
SKU: CRS326-24S+2Q+RM
SKU: CRS326-24S+2Q+RM -
Cloud Router Switches
Mikrotik Cloud Router Switch CRS309-1G-8S+IN
The Mikrotik Cloud Router Switch CRS309-1G-8S+IN is a very compact, yet powerful networking switch. It has eight SFP+ slots, supporting up to 10 Gbit modules in each, which results in a total switching capacity of 162 Gbps and total non-blocking throughput of 81 Gbps.
The device also has a dual-core 800 MHz CPU, 512 MB RAM, a management Ethernet port with PoE power input, RS232 serial port, a grounding terminal and is capable of dual boot (choose which operating system you prefer, RouterOS, or SwOS).
SKU: CRS309-1G-8S+INSKU: CRS309-1G-8S+IN -
Mikrotik Interfaces
Mikrotik 5Ghz miniPCI-express R11e-5HnD
- 5Ghz miniPCI-express, 802.11a/n dual chain, 2x MMCX
High power 4920-5920MHz 802.11a/n dual chain wireless card in the miniPCI-e format. Ideally suited for the new RB912 series, RB800, or our new miniPCIe adapter card – RB14e. - The card features built-in LED indicators for wireless mode, connection status (connected, searching, disabled), TX and RX activity, and wireless signal strength – just looking at the card will help with installation and alignment.- DDM monitoring (Supply Voltage, Module temperature) is now supported.
SKU: R11e-5HnD
SKU: R11e-5HnD - 5Ghz miniPCI-express, 802.11a/n dual chain, 2x MMCX
-
SFP
Mikrotik 6-speed RJ-45 module S+RJ10
- 6-speed RJ-45 module for up to 10 Gbps
- This unique module opens up a whole world of high-speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.
- S+RJ10 module is supported also on devices with passive cooling but may require extra cooling.
- The latest revision of S+RJ10 contains “/r2” by the end of the serial number. It comes with the following improvements:- Jumbo frames up to 10218 Bytes are now supported for rates 2.5Gbps, 5Gbps, and 10Gbps;- Link speed reporting is fixed – actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;- DDM monitoring (Supply Voltage, Module temperature) is now supported.
SKU: S+RJ10
SKU: S+RJ10 -
LoRa, wAP
MikroTik Antenna kit for LoRa®TOF-0809-7V-S1
- 6.5 dBi Omni antenna for 824-960 MHz
- Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz, 1 m long SMA cable, and mechanical holder for quick and easy mast attachment – when you need that extra network coverage.
SKU: TOF-0809-7V-S1
SKU: TOF-0809-7V-S1 -
Basebox, Mikrotik Access Points, MikroTik Antennas
Mikrotik Basebox 2 RB912UAG-2HPnD-OUT
- The BaseBox2 is an outdoor 2.4Ghz wireless device, based on our popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual-band device or a 3G/4G modem.
- The case can be opened with one hand and is protected against the elements. USB, Ethernet, and Grounding wire exits are provided on the bottom, behind a protective door.
- Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. The package also includes a PoE injector and power supply unit.
SKU: RB912UAG-2HPnD-OUT
SKU: RB912UAG-2HPnD-OUT -
Basebox, Mikrotik Access Points, MikroTik Antennas
Mikrotik Basebox 5 RB912UAG-5HPND-OUT
- TheThe RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual-band device.
- The case can be opened with one hand and is protected against the elements. USB, Ethernet, and Grounding wire exits are provided on the bottom, behind a protective door.
- Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. The package also includes a PoE injector and power supply unit.
- Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount- RB912UAG-5HPnD-OUT-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- RB912UAG-5HPnD-OUT (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RB912UAG-5HPND-OUT
SKU: RB912UAG-5HPND-OUT -
cAP, Mikrotik Access Points
Mikrotik cAP AC RBcAPGi-5acD2nD
- Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support, and IPsec hardware encryption support
- The cAP ac is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual-band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ас standards and will provide coverage in 360 degrees around it.
- Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output on the second port. The device supports IPsec hardware acceleration too.- cAP ac (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).- cAP ac-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz, and 5725-5835MHz frequencies. This lock can not be removed.
SKU: RBcAPGi-5acD2nD
SKU: RBcAPGi-5acD2nD -
cAP, Mikrotik Access Points
Mikrotik cAP Ceiling Access Point RBCAP2ND
- Ceiling AP, Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support
- RouterBOARD cAP-2nD (ceiling Access Point) is our first 2.4GHz Dual-Chain ceiling AP. Inconspicuously designed, it blends into the environment, perfect for hospitality businesses like hotels, airports, shopping malls, etc.
- cAP-2nD supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location.
- Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller machine.Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter, and even the screws and screw anchors.
SKU: RBCAP2ND
SKU: RBCAP2ND -
cAP, Mikrotik Access Points
Mikrotik cAP Lite RBcAPL-2nD 2.4Ghz Access Point
- Low-cost dual-chain 2.4GHz AP with wall and ceiling enclosure
- The cAP lite is a tiny access point device, perfect for public locations and hospitality businesses like hotels, airports, shopping malls, etc. Included with the product are two different casings, which can easily be swapped out, or, if you really like to fit the design with the environment, we are providing 3D printer-friendly design files.
- The cAP lite supports 802.11b/g/n and can be powered by power over ethernet. It’s a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand-alone access point with the full potential of RouterOS.
SKU: RBcAPL-2nD
SKU: RBcAPL-2nD -
DISC
MikroTik DISC Lite5 AC RBDiscG-5acD
- Outdoor 5GHz 802.11a/n/ac wireless device with a backfire type 21dBi integrated antenna and Gigabit Ethernet for longer distances
- The DISC is a low-cost high gain 5 GHz CPE. We have improved antenna design, added a Gigabit Ethernet port and 802.11a/n/ac support to achieve even more speed on longer distances.
- DISC Lite5 ac is equipped with a 21 dBi dual chain antenna, 802.11a/n/ac integrated wireless, 716 MHz CPU, 256 MB RAM, 1x Gigabit Ethernet port, and RouterOS Level 3 license. It comes complete with a power supply, Gigabit PoE injector, and a mounting ring. The device is also compatible with our SXT mounting systems, including the quickMOUNT pro series.
- The RouterOS Level 3 allows using the DISC Lite5 ac as a CPE or for 5 GHz Point-to-Point links.- DISC Lite5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- DISC Lite5 (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU:RBDiscG-5acD
SKU: RBDiscG-5acD -
DISC
MikroTik Disc Lite5 RBDisc-5nD
- Dual chain 21dBi 5GHz CPE/Point-to-Point Integrated Antenna, 600Mhz CPU, 64MB RAM
- DISC Lite5 is an integrated 21dBi Dual Chain 802.11n CPE with a 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port, and RouterOS L3 installed. The DISC uses a backfire-type antenna which allows reaching 21dBi gain in such a low cost and compact package.
- The device comes complete with a power supply, PoE injector, and mounting kit for an ultra low cost at $48!
- The RouterOS Level3 allows using the DISC Lite5 as CPE or Point-to-Point 5GHz links.
- We have two versions available.- DISC Lite5 US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- DISC Lite5 (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBDisc-5nD
SKU: RBDisc-5nD -
DynaDish
MikroTik DynaDish 5 RBDynaDishG-5HacDr3
- Dual chain 5GHz 802.11a/n/ac QCA9892, 128MB RAM, 720 MHz CPU, 25dBi antenna gain
- The DynaDish 5 is a new 802.11ac outdoor device with an integrated 25dBi antenna. Compact in its design, it is a simple and completely integrated product with everything you need to quickly install a reliable point-to-point link.
- The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm.
- – RBDynaDishG-5HacD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- – RBDynaDishG-5HacD (International) supports the 5150-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBDynaDishG-5HacDr3
SKU: RBDynaDishG-5HacDr3 -
FiberBox Switches
Mikrotik FiberBox Switch CRS105-5S-FB
- The Fiberbox is an outdoor switch with five SFP ports, ideal for locations where distance is restricting the use of regular ethernet cables. The device is weatherproof and comes with a hose clamp and zip ties, ready to be installed on high masts and towers.
- The package also includes the RJ45 SFP (S-RJ01) copper module already preinstalled in the first port, so you can use ethernet in one of the ports already out of the box. If not needed, remove it to have access to all five SFP ports for use with 1.25 Gbit fiber modules.
SKU: CRS105-5S-FB
SKU: CRS105-5S-FB -
Mikrotik Enclosures
Mikrotik Fits RB433 CA433U
- Black aluminum indoor, Fits RB433 series and RBM33G
Indoor case (3 holes for Nfemale Bulkhead connectors or Swivel antennas and hole for USB). This new revision is slightly higher, to fit more miniPCI card models. Ships with different faceplate stickers, to match used ports. - Fits RB433 series products and RBM33G
SKU: CA433U
SKU: CA433U - Black aluminum indoor, Fits RB433 series and RBM33G
-
Mikrotik Enclosures
Mikrotik Fits RB493 CA493
- Black aluminium indoor, Fits RB493 series
Black aluminum Indoor case (3 holes for Nfemale Bulkhead connectors or AC/SWI Swivel antennas). This new revision is slightly higher, to fit more miniPCI card models.Fits RB493 series products
SKU: CA493
SKU: CA493 - Black aluminium indoor, Fits RB493 series
-
Groove
MikroTik Groove 52 RBGroove52HPn
- 2.4GHz/5GHz Backbone/CPE, N-male connector
- Our smallest outdoor series model – a fully featured wireless RouterBOARD powered by RouterOS. Weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in wireless radio. It has software selectable 2 or 5GHz wireless mode, and high output power!
- With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.
- Box contains: Groove unit, mounting loops, PoE injector, and power adapter
- We have two versions available.-Groove 52-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.
- – Groove 52 (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBGroove52HPn
SKU: RBGroove52HPn
