Shop
Showing 97–120 of 298 results
-
MikroTik Accessories
Mikrotik RB-PoE Injector RBPOE
- PoE injector, for 10/100Mbps products
- Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps to reduce the number of wires that lead up the tower, and in other situations.
- For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accommodate any losses in cables.
SKU: RBPOE
SKU: RBPOE -
SFP
Mikrotik RJ45 SFP 10/100/1000M copper module
- RJ45 SFP 10/100/1000M copper module
- S-RJ01 is RJ45 SFP 10/100/1000M copper module, compatible with most Gigabit SFP ports available on various networking devices. Shipped with CCR1016-12S-1S+, popular demand is now also available for purchase separately.
SKU: S-RJ01
SKU: S-RJ01 -
Sleeve
Mikrotik Sleeve30
- Sleeve30 kit for our mANT30 parabolic antenna to enhance point-to-point link performance
- The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce the impact on adjacent RF devices by removing the side radiation from the antenna.
- Sleeve30 Kit also reduces wind load and protects antenna reflector and feed on the harsh environment, improving PtP link sustainability.
- Sleeve30 shell is made of corrosion resistive, lightweight aluminum; the front cover has excellent RF signal transparency.Includes aluminum shell, front cover, fasteners, silicone sealant
Note: Basebox wireless device pictured for illustrative purposes. It is not included
SKU: Sleeve30
SKU: Sleeve30 -
Mikrotik Switches
MikroTik Switch RB260GSP
- 5x Gigabit PoE out Ethernet Smart Switch, SFP cage, plastic case, SwOS
- The RB260GSP is a small SOHO switch, which features power output on its ethernet ports. Ports 2-5 can power other PoE-capable devices with the same voltage as applied to the unit (passive PoE over datalines only). The RB260GSP has five Gigabit Ethernet ports and one SFP cage, switching is done by an Atheros Switch Chip. The device is running an operating system designed specifically for MikroTik Switch products – SwOS.
SKU: R RB260GSP
SKU: RB260GSP -
Mikrotik Switches
MikroTik Switche RB260GS
- 5x Gigabit Ethernet Smart Switch, SFP cage, plastic case, SwOS
- The RB260GS is a small SOHO switch. It has five Gigabit Ethernet ports and one SFP cage powered by an Atheros Switch Chip.
- Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D, and S-35/53LC20D (not included)
- It is powered by an operating system designed specifically for MikroTik Switch products – SwOS.
- SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: Allows you to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
SKU: RB260GS
SKU: RB260GS -
SXT
Mikrotik SXTsq 5 AC RBSXTSQG-5ACD
- Low-cost small-size 16dBi 5GHz dual chain integrated CPE/Backbone with AC support and Gigabit Ethernet
- The SXTsq 5 ac is a compact and lightweight outdoor 5Ghz 802.11ac wireless device with an integrated antenna, perfect for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize the speeds that the 802.11ac protocol provides.
- The SXTsq 5 ac retains a 16 dBi antenna like the SXT 5 ac, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner.- SXTsq 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBSXTSQG-5ACD
SKU: RBSXTSQG-5ACD -
SXT
MikroTik SXTsq Lite5 CPE RBSXTSQ5nD
- Low-cost small-size 16dBi 5GHz dual chain integrated CPE/Backbone
- The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point-to-point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof, and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced – the SXTsq is two times thinner (see photos for comparison).
- The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows adjusting at every angle (see photo and related product).- SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.- SXTsq Lite5 (International) supports the 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
SKU: RBSXTSQG-5ACD
SKU: RBSXTSQ5nD -
Audience
MikroTik Tri-band Audience LTE6 kit
- Tri-band (one 2.4 GHz & two 5 GHz) home access point with LTE CAT6 support and meshing technology
- Wi-Fi has to be fast, reliable, easy to manage, it must reach every room and every corner. That is exactly what Audience devices can deliver in grand style – even in the biggest houses!
- Audience LTE6 kit is a tri-band (one 2.4 GHz & two 5 GHz ) home access point with LTE support and meshing technology. If you need Wi-Fi in a huge building with all kinds of obstacles, simply add more Audience devices to your network – with a press of a button they will sync seamlessly and create a single Wi-Fi network to cover the whole premises. The initial setup is also very simple – download the iOS or Android MikroTik app, which will connect to the router and guide you through a quick setup process.
- In some cases, a single Audience unit might be able to replace several other routers – in our tests it covered 1858 m² (20000 square feet) easily. It depends on the number of obstacles, Wi-Fi clients, and interference, so results may vary.
- Cables can no longer limit you. CAT6 LTE delivers speed up to 300 Mbps with low latency, so having a traditional Ethernet connection is not a must-have for streaming high-quality videos or gaming. Alternatively, you can use the two Gigabit Ethernet ports and keep the LTE option for backup. One of the Ethernet ports supports PoE for powering the device.
Dual-chain 2.4 GHz and 5 GHz wireless coverage will solve most interference issues in a crowded environment. For example, you can simultaneously use the 2.4 GHz channel for all your household mobile devices and reserve the 5 GHz channel for your PC or TV. - Order your Audience today and start living in the future. The future of easy and elegant networking.
SKU: RBD25GR-5HPacQD2HPnD&R11e-LTE6
SKU: RBD25GR-5HPacQD2HPnD&R11e-LTE6 -
wAP
Mikrotik wAP ac RBwAPG-5HacT2HnD
- Small dual-band 2.4 / 5GHz white weatherproof wireless access point for mounting on a ceiling, wall, or pole
- The wAP ac is a small weatherproof wireless access point for your mobile devices, perfect for installation outside your house, in the garden, on your porch, or anywhere else where you need wireless access from your phone or computer.
- The device has one Gigabit Ethernet port, it supports 802.11a/b/g/n/ac wireless protocols and can work at both the 2.4GHz and 5GHz frequencies simultaneously. It looks unobtrusive and sleek.
- The wAP ac is weatherproof and can be fixed to any external wall from the inside of the case – so that it is securely attached to its mounting location.
- We have two versions available.- RBwAPG-5HacT2HnD (International) supports 2412-2484MHz and 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).- RBwAPG-5HacT2HnD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz, and 5725-5835MHz frequencies. This lock can not be removed.
SKU: RBwAPG-5HacT2HnD
SKU: RBwAPG-5HacT2HnD -
Wire Dish
Mikrotik Wireless Wire Dish RBLHGG-60adkit
- 2 Gb/s aggregate link up to 1500m+ without cables!
- The Wireless Wire Dish is a groundbreaking solution that offers Fiber speed and quality on distances up to 1500 m for a fraction of the price!
- This amazing kit makes a secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 1500 meters or more. Simply point the included devices at one another and power them on, they are already preconfigured to connect automatically and will make a 2 Gb/s aggregate link.
- The box includes two LHGG-60ad devices that are already paired together, power supplies, PoE injectors, and mounting kits for both devices.
SKU: RBLHGG-60adkit
SKU: RBLHGG-60adkit -
nRay
MikroTik Wireless Wire nRAY 60 GHznRAYG-60adpair
- The most compact wireless 2 Gb/s aggregate links in the 1500 m range or more! Improved snow-resistant design is perfect for harsh weather environments. Cables can no longer limit you!
- Our team has gathered and taken into account your feedback to make a worthy successor of our popular Wireless Wire Dish. Now we are proud to present the best plug-and-play 60 GHz point-to-point link solution to date – the Wireless Wire nRAY. It is a kit of two pre-paired devices that make a secure AES encrypted wireless connection.
- It can easily cover a distance of 1500 meters and reach fiber-like speed, and we have made some serious structural improvements. With the latest antenna technologies, this device is very compact, but even more durable than its predecessors.
- The new form-factor has been designed with snowy areas in mind – you won’t have to worry about huge chunks of snow getting stuck and messing with the signal. Due to its size and shape, the nRAY also attracts less unwanted attention. Using the special fine-tune adjustment screws, a perfect alignment can be achieved.The 60 GHz frequency is unaffected by the crowded wireless spectrum, so you can enjoy a smooth connection even in a busy urban environment. A powerful arm64 dual-core CPU running at 1 GHz ensures wire-speed throughput in nearly all packet sizes. The included devices are preconfigured to connect automatically, simply point them at one another and power them on! We have included the power supplies, PoE injectors, and a handy precision mount for easier alignment – the solidMOUNT. It is an advanced pole mount metal adapter that allows adjustment both vertically and horizontally.
SKU: nRAYG-60adpair
SKU: nRAYG-60adpair -
NanoSwitch
Ubiquiti 4 Port NanoSwitch N-SW
- Outdoor 4-Port PoE Passthrough Switch
- The NanoSwitch is an outdoor 4-port Gigabit switch with a PoE passthrough.
- The Ubiquiti 4 Port NanoSwitch N-SW is an unmanaged switch with four Gigabit Ethernet ports. For its total non-blocking line rate, the 4 Port switch supports up to 4 Gbps. Featuring a durable, weatherproof form factor, the NanoSwitch is ideal for outdoor deployment and for use with the Ubiquiti airMax and UniFi Video range.
SKU: N-SW
SKU: N-SW -
AirFiber
Ubiquiti AirFiber 5 Wireless Bridge AF5
- 5 GHz Full Duplex Point-to-Point Gigabit Radio
- The airFiber®5 is purpose-built for outdoor, PtP bridging, and carrier-class network backhauls.
- The Ubiquiti AirFiber 5 Wireless Bridge (AF5) is a revolutionary backhaul point-to-point radio system. Offering 5GHz with a 100Km+ range at incredible 1Gbps+ speeds, the airFiber5 will take advantage of popular worldwide mid-band frequencies.
SKU: AF5
SKU: AF5 -
LiteAP, Ubiquiti Access Points
Ubiquiti airMAX LiteAP 5AC 17dBi 90° Access Point LAP-GPS
- I2x2 MIMO airMAX® ac Sector AP
- The LiteAP™ ac is an ultra-lightweight airMAX ac Access Point with incredible performance and disruptive pricing.
- Ubiquiti’s LiteAP GPS is a lightweight, high-performance, 2×2 MIMO 90° sector antenna with an integrated 5GHz radio. Designed as a solution for long-distance wireless bridging, the LiteAP GPS offers 17dBi gain, and with its airMAX ac processor, the LiteAP is capable of throughput speeds of up to 450+Mbps.
SKU: LAP-GPS
SKU: LAP-GPS -
AirMax Antennas
Ubiquiti Airmax BaseStation Sector Antenna AC AM-5AC21-60
- airMAX® ac 2×2 BaseStation Sector Antenna
- Ubiquiti airMAX ac 5GHz 21dBi Sector Antenna (60° 2×2 MIMO)
- Ubiquiti Networks AM-5AC21-60 is an airMAX sector antenna designed for use with Rocket radios. The Ubiquiti Airmax AC Sector Antenna AM-5AC21-60 model has a 60° beamwidth, 21dBi gain, and supports 2×2 MIMO.
- The airMAX ac Sector Antennas are highly resistant to noise interference in co-location deployments and feature an innovative deflector design, together with the reduced sidelobes and back lobes, reject interference from other transmitters in the area – potentially on the same tower.
- With improved Signal-to-Noise Ratio (S/N or SNR), the airMAX ac Sector Antennas allow a higher-order modulation to be used, for example, 256QAM rather than 16QAM. This increases the number of bits per second for a fixed bandwidth (or data rate).
- Pair the Ubiquiti Airmax AC Sector Antenna with the Rocket 5AC Lite for AC Backhaul.
SKU: AM-5AC21-60
SKU: AM-5AC21-60 -
LiteAP, Ubiquiti Access Points
Ubiquiti airMAX LiteAP AC Access Point LAP-120
- I2x2 MIMO airMAX® ac Sector AP
- The LiteAP™ ac is an ultra-lightweight airMAX ac Access Point with incredible performance and disruptive pricing.
- Ubiquiti’s LiteAP ac is a lightweight, high-performance, 2×2 MIMO 120° sector antenna with an integrated 5GHz radio. Designed as a solution for long-distance wireless bridging, the LiteAP ac offers 16dBi gain, and with its airMAX ac processor, the LiteAP is capable of throughput speeds of up to 450+Mbps
SKU: LAP-120
SKU: LAP-120 -
LiteBeam
Ubiquiti airMAX LiteBeam AC Gen2 LBE-5AC-GEN2
- 2×2 MIMO airMAX® ac CPE
- The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.
- Ultra-lightweight design with proprietary airMAX ac chipset and dedicated management Wi-Fi for easy UISP mobile app support and fast setup. This Ubiquiti LiteBeam AC Gen2 LBE-5AC-GEN2 CPE features adjustment flexibility in three axes for versatile mounting options.The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the Ubiquiti 5ghz airMAX AC Litebeam Gen2 Radio blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
SKU: LBE-5AC-GEN2
SKU: LBE-5AC-GEN2 -
LiteBeam
Ubiquiti airMAX Litebeam LBE-5AC-LR
- 2×2 MIMO airMAX® ac CPE
- The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing.
- Designed for long-range applications, the Ubiquiti airMAX Litebeam LBE-5AC-LR features a larger reflector size and elevation adjustment (azimuth is adjusted by rotation around the pole).
- Ubiquiti Networks launches the latest generation of airMAX® CPE (Customer Premises Equipment), the LiteBeam® 5AC Gen 2, with dedicated Wi-Fi management. Improved Noise Immunity The LiteBeam 5AC Gen 2 directs RF energy in a tighter beamwidth. With the focus in one direction, the LiteBeam 5AC Gen 2 blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency. The LiteBeam 5AC Gen 2 offers quick and easy alignment and enhanced protection against power surges.
SKU: LBE-5AC-LR
SKU: LBE-5AC-LR -
LiteBeam
Ubiquiti airMAX Litebeam M5 5Ghz 23dBi LBE-M5-23
- Long-Range, Lightweight airMAX® CPE
- The LiteBeam™M is an ultra-lightweight airMAX CPE device with incredible range and disruptive pricing.
- The Ubiquiti Litebeam M5 LBE-M5-23 is the latest evolution of a lightweight and compact, outdoor wireless broadband product from Ubiquiti Networks. Each of these models was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. The Ubiquiti airMAX Litebeam M5 5Ghz 23 dBi Bridge operates in the worldwide, license-free 5 GHz frequency range with high-performance speeds.
SKU: LBE-M5-23
SKU: LBE-M5-23 -
NanoBeam
Ubiquiti airMAX NanoBeam AC 5GHz Bridge NBE-5AC-GEN2
- High-Performance airMAX® ac Bridge
- Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.
SKU: NBE-5AC-GEN2
SKU: NBE-5AC-GEN2 -
NanoStation
Ubiquiti airMAX NanoStation 5AC 5GHz 16dBi CPE NS-5AC
- 5 GHz airMAX® ac CPE
- The indoor/outdoor NanoStation® AC and NanoStation AC loco are compact, high-performance CPEs featuring airMAX® AC technology and a dedicated Wi-Fi radio for management.
- The Ubiquiti NanoStation 5AC (NS-5AC) radio comes equipped with a Gigabit Ethernet networking interface and supports multiple MHz channel bandwidths. Installation is simple, thanks to the included pole-mount kit, while the outdoor UV stabilized plastic enclosure allows the airMAX ac radio to be installed in nearly any environment.
- Designed for deployment in a variety of environments in which point to multi-point communication is needed, the Nano-Station AC loco 5 GHz air-MAX ac offers enhanced connectivity options. This radio comes equipped with a Gigabit Ethernet networking interface and supports 10/20/30/40/50/60/80 MHz channel bandwidths.
- Installation is simple, thanks to the included pole-mount kit, while the outdoor UV stabilized plastic enclosure allows the airMAX ac radio to be installed in nearly any environment
SKU: NS-5AC
SKU: NS-5AC -
NanoStation
Ubiquiti airMAX NanoStation 5AC Loco
- 5 GHz airMAX® ac CPE
- The indoor/outdoor NanoStation® AC and NanoStation AC loco are compact, high-performance CPEs featuring airMAX® AC technology and a dedicated Wi-Fi radio for management.
- Designed for deployment in a variety of environments in which point to multi-point communication is needed, the Ubiquiti airMAX NanoStation 5AC Loco Radio from Ubiquiti Networks offers enhanced connectivity options.
- The Loco AC comes equipped with a Gigabit Ethernet networking interface and supports 10/20/30/40/50/60/80 MHz channel bandwidths. Installation is simple, thanks to the included pole-mount kit, while the outdoor UV stabilized plastic enclosure allows the airMAX ac radio to be installed in nearly any environment.
SKU: Loco5AC
SKU: Loco5AC
