-
netPower Switches
Mikrotik netPower Lite 7R CSS610-1Gi-7R-2S+OUT
- An outdoor reverse PoE switch with Gigabit Ethernet and 10G SFP+ ports.
- With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
- With this switch, you won’t have to worry about power issues, as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps, switching capacity of 56 Gbps, and a forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately. Read more information about GPEN concept.
SKU: CSS610-1Gi-7R-2S+OUT
SKU: CSS610-1Gi-7R-2S+OUT -
SFP
Mikrotik 6-speed RJ-45 module S+RJ10
- 6-speed RJ-45 module for up to 10 Gbps
- This unique module opens up a whole world of high-speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network can be upgraded to 10 Gbps, making it ready for the next generation of RJ45 hardware.
- S+RJ10 module is supported also on devices with passive cooling but may require extra cooling.
- The latest revision of S+RJ10 contains “/r2” by the end of the serial number. It comes with the following improvements:- Jumbo frames up to 10218 Bytes are now supported for rates 2.5Gbps, 5Gbps, and 10Gbps;- Link speed reporting is fixed – actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly;- DDM monitoring (Supply Voltage, Module temperature) is now supported.
SKU: S+RJ10
SKU: S+RJ10 -
QSFP
Mikrotik QSFP+ cable Q+DA0001
- 40 Gbps direct attach QSFP+ cable
- Connect two CRS326-24S+2Q+RM switches without a hassle – this cable has integrated QSFP+ modules, plug it in and enjoy the speed! The cable is 1 meter long and is fairly flexible – your devices don’t have to be on top of each other.
SKU: Q+DA0001
SKU: Q+DA0001
netPower Switches
Mikrotik netPower Lite 7R CSS610-1Gi-7R-2S+OUT
Availability:
6 in stock
- An outdoor reverse PoE switch with Gigabit Ethernet and 10G SFP+ ports.
- With netPower Lite 7R switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is an easy to deploy, low-cost way for any ISP to deliver the Internet to individual apartments.
- With this switch, you won’t have to worry about power issues, as there are many options. netPower Lite 7R has 7 reverse PoE ports. Depending on your setup, netPower can draw the necessary power even from a single client! Ethernet port 8 can power other PoE capable devices with the same voltage as applied to the unit. There is also a DC jack and a 2-pin terminal for alternative powering.The outdoor enclosure allows you to install this switch in all kinds of environments – from damp attics to elevator shafts and different poles with hose clamps. netPower Lite 7R has a non-blocking throughput of 28 Gbps, switching capacity of 56 Gbps, and a forwarding rate of 41.7 Mpps.The power supply is NOT included with the product- must be purchased separately. Read more information about GPEN concept.
SKU: CSS610-1Gi-7R-2S+OUT
$126.06 $130.13
6 in stock
Compare
$126.06 for 3 item(s)
Specifications
Details | |
---|---|
Product code | CSS610-1Gi-7R-2S+OUT |
Dimensions | 304 x 212 x 71 mm |
Operating System | SwitchOS Lite |
Storage size | 64 KB |
Storage type | FLASH |
MTBF | Approximately 200’000 hours at 25C |
Tested ambient temperature | -40°C to 70°C |
Suggested price | $129.00 |
Powering
Details | |
---|---|
Number of DC inputs | 3 (PoE-IN, DC jack, 2-pin terminal) |
DC jack input Voltage | 12-57 V |
2-pin terminal input Voltage | 12-57 V |
Max power consumption | 29 W |
Max power consumption without attachments | 7 W |
FAN count | Passive |
PoE in | Passive PoE |
PoE in input Voltage | 12-57 V |
PoE-out
Details | |
---|---|
PoE-out ports | Ether8 |
PoE out | Passive PoE |
Max out per port output (input 18-30 V) | 600 mA |
Max out per port output (input 30-57 V) | 450 mA |
Ethernet
Details | |
---|---|
10/100/1000 Ethernet ports | 8 |
Number of 1G Ethernet ports with Reverse PoE (PoE-in) | 7 |
Number of 1G Ethernet ports with PoE-out | 1 |
Fiber
Details | |
---|---|
SFP+ ports | 2 |
Certification & Approvals
Details | |
---|---|
Certification | CE, EAC, ROHS |
IP | IP54 |
Included parts
Brands | MikroTik Wireless |
---|
There are no reviews yet.